How to Tell if My WiFi is 2.4 or 5GHz? (2 Simple Ways).

Just a few years ago, the frequency used in most routers was 2.4 GHz WiFi. However, the 5 GHz frequency has started to be used, so dual-band routers have appeared, using either of the two frequencies above. So the question here arises; how to tell if WiFi is 2.4 or 5 GHz?

In general, it is said, 2.4GHz is the best to connect away from the device since it is less sensitive to distance and possible walls. On the other hand, the 5GHz offers the most speed, but it is more sensitive to distance. Thus, it is vital to choose the appropriate WiFi channel and the band to which you have to use.

For this reason, it becomes essential to know how many GHz your WiFi has?

How Many GHz is My WiFi? (2.4 or 5GHz)

In Windows 10, there are two easy ways of knowing the band of the connected Wi-FI:

1. See the Wi-Fi Band from Windows Settings

1. Open the settings of the Windows, and then click on the Network and Internet section. Now, under the wireless network, click the Hardware properties link.

Wifi hardware properties link in windows 10 settings

2. Once you click, you get to the properties page, and here you will find everything related to the wireless network, including network band (GHz), IP address, security type, etc. For instance, as you can see in the image below, I am connected to the Wi-Fi using 2.4 GHz.

wifi properties page

2. Find out the Wi-Fi GHz from the Command Prompt

Open search bar, type in cmd, and click on open or run as administrator. The command console will open, copy and paste the text “Netsh WLAN show drivers” and execute the command by pressing the enter.

3. Next, you have to look at the types of radio supported that have to your router, in order to verify your router’s GHz from the given table.

Supported radio cardsSupported BANDS (GHz)
802.11a5 GHz
802.11b2.4 GHz
802.11g2.4 GHz
802.11n (WiFi 4)2.4 GHz and 5 Ghz (Both)
802.11ac (WiFi 5)5 GHz
802.11ax (WiFi 6)2.4 GHz and 5 Ghz (Both)

For instance, as you can see in the image below, In this case, supported radio types are 802.11n, 802.11g, 802.11b, which means the supported GHz of my WiFi is both 2.4 and 5 GHz.

Netsh WLAN show drivers

Bonus Insight: On many occasions, you can find two networks with similar names like xyzWifi5G and xyzWifi2.4G. In the event that if you are connected to a network that has “5G” or “5GHz” in its name, it means that you have connected to the 5 GHz band. Otherwise, or “2.4 GHz” appears, it would be a 2.4 GHz band connection.

How to Know GHz of my WiFi if I Connected to LAN Cable?

In this case, the above given two methods won’t work. If you are connected to the LAN, USB or ethernet cable, knowing the router’s frequency is not very complicated. In fact, many routers have this information on the label on the bottom side, so look at the back of the device to find out.

In any case, you didn’t find any label or text written at the back of the device. The only last way to find out the GHz of your Wi-Fi router is to check on the official website of the router.

For instance, you can see the specs of the Archer C20 V4 router.

specs of the Archer C20 V4 router

I hope you got the “How to Know GHz of a Wifi Router: either 2.4, 5 or Both GHz” You can also share this insightful article on social networks.

Spread the Insights!

Leave a Reply

Digitalworld839.com
Scroll to Top